Custom Reach-in Closets in Maryland and Northern Virginia
Your standard bedroom closet, rebuilt to hold twice as much. Designed in 3D, installed by our own team.
Book a Free Consultation
- Free In-Home Consultation
- Exact Price in Writing
- Lifetime Warranty · No Fees
- Local, Not a Franchise
- Inspect Before You Pay
- Licensed & Insured · MD & VA
Why a reach-in
The smallest closet, the biggest difference.
A builder-grade reach-in is one rod and one shelf. Everything above the shelf is wasted, everything below the rod is a pile. A custom reach-in uses the full height of the wall and the full width of the opening, so the same footprint holds roughly twice the clothing and all of it stays visible.
Double hang
Two rods stacked in one section. Shirts up top, pants folded over hangers below. This one change is where most of the extra capacity comes from.
Drawers where the floor pile was
A drawer bank in the center or on one side replaces the dresser fighting for space in the bedroom. Soft-close, sized to what you actually store.
Shoes off the floor
Angled or flat shoe shelving, sized to your pairs, in the corner that used to collect everything.
Adjustable for life
Every shelf and rod sits on the 32mm system, so it moves when your needs do. A kid's closet grows up without a rebuild.
How it works
Three steps, one visit to your home.
We measure your closet at a free in-home consultation and design it with you in 3D on the spot, so you see your exact closet before you commit. You get an exact price in writing, not a starting-at number. The system is cut to order to our spec, assembled and staged in our Gaithersburg workshop, and installed by our own team in 2 to 3 weeks. You inspect the finished closet before the balance is due.
Exact price in writing at your free consultation.
How it works
Free in-home consultation
3D design and your exact price in writing
Built in 2 to 3 weeks
Installed by our own team
You inspect the finished work before the balance is due
Where we work
Proudly servingthe DMV Area.
Northern Virginia · Loudoun County
AshburnLeesburgChantillySterlingHerndonPurcellville
Northern Virginia · Fairfax County
McLeanGreat FallsViennaRestonFalls ChurchOaktonBurke
Northern Virginia · Arlington County
ArlingtonClarendonBallston
Maryland · Montgomery County
BethesdaChevy ChasePotomacRockvilleSilver Spring
Maryland · Howard County
ColumbiaEllicott City
Maryland · Frederick County
FrederickUrbana
Maryland · Prince George's County
BowieCollege ParkUpper Marlboro
Washington, DC
Northwest DCGeorgetown
Your project is designed and built by our own DMV team.
Not subcontracted. Not franchised. Not shipped from another state.
Licensed and insured in Maryland and Virginia. MHIC No. 169404.
Maker Closets is two makers with 25 years of combined craft, working from our Gaithersburg, MD workshop. Every closet is designed, built, and installed by our own team, never subcontractors, and backed by a lifetime warranty with no service fees.
Get started
Let’s build somethingworth opening every morning.
Free in-home consultation across the DMV.
Prefer to talk? Maryland (240) 599-2241 · Virginia (571) 717-5577
FAQ
Real questions. Straight answers.
How much does a custom reach-in closet cost?
Less than a walk-in, and it depends on the width of the opening, the drawer count, and the finish. We do not quote from a chart. We measure, design it in 3D, and give you an exact price in writing at your free consultation. For published market ranges, see our Maryland cost guide.
Can you fit a custom system in a standard 6-foot reach-in?
Yes. Most bedroom reach-ins are 5 to 8 feet wide, and that is the range we design for most often. The system is cut to your exact opening, so there are no filler panels and no wasted inches.
Do you remove the old shelf and rod?
Yes. Removing the old shelf and rod is part of the installation. Ask us about wall patching at your consultation.
How long does a reach-in closet take to install?
The build takes 2 to 3 weeks after you approve the design, then our own team installs it.
Can I keep the existing closet doors?
Usually, yes. We design around your door type, whether bifold, sliding, or hinged. If sliding doors block part of the opening, we will show you in the 3D design how the layout works around them.
Do you do kids' closets?
Often. A kids' reach-in is designed low now and adjusts up later. Because every shelf and rod sits on the 32mm system, the same closet works at age 6 and age 16 without a rebuild.
Something we didn’t answer? Ask us directly.